The C Port Cable is for use with XBC Robot Controllers. Use this cable with parallel port on your computer to re-flash your XBC. C Port Cable includes a CD containing a re-flashing interface file.
This can fix your XBC if your XBC needs to be re-flashed. Extremely useful for teachers, schools, or individuals with multiple XBCs.
Not sure if you need to re-flash your XBC - Here are some helpful insights
Probable symptoms that your XBC may need to be re-flashed
Your XBC does not need to be re-flashed if:
Note: Re-flashing does not always fix these problems. It is possible with any of these problems that you have a dead Xport.
You will need a Windows machine with a parallel port to use this cable!
If you have questions about any problems you may be having with an XBC please talk to one of our lab technicians at (405)579-4609.
If you've lost your CD, you can download the re-flashing application using this link:
You can download the re-flashing instructions using this link:
Gameboy boots to a black screen
Gameboy boots to the black splash screen that says \"Gameboy\" but no \"Nintendo\" logo
Gameboy boots to black splash screen that says\"Gameboy\" but the \"Nintendo\" logo is pixilated
Gameboy boots normally, then freezes on a white screen
Gameboy boots normally, then freezes on a black screen with white writing
Gameboy does not turn on when attached to the XBC, but turns on when disconnected
The Gameboy boots into IC
You see the red and green lights on the Xport flashing
You boot into a diagnostic menu
You cannot connect to the Create
The Gameboy does turn on when not connected to the XBC